A: 'Lilacs', Ferry Road, Fingringhoe, Colchester, CO5 7BY, UK. T: +44(0)1206 729295 F: +44(0)1206 728418

Spare Parts

Source of spare parts for the following coffee and associated equipment.:-

  • John Gordon - Disc pulpers, hullers, catadors, copper covers
  • Bentall - Okrassa polishers, Kivu pumps, Aquapulpas
  • Denlab - Hullers, Pulpers, dryers
    		•

    John Gordon Disc Coffee Pulper

    80 Left Hand Pulping Bar Complete

    81 Right Hand Pulping Bar Complete

    82 Steel Base Bar

    83 Left Hand Pulping Chop with Reed

    84 Back Bearing for 85

    85 Eccentric Spindle

    86 Front Index Bearing for 85

    87 Brass Adjusting Lever

    88 Knife Edge with 5 Screws

    89 Right Hand Pulping Chop with Reed

    90 Detachable Reed with Screw

    91 Chop Cover

    92 Bolt and washer for Chop Cove

    93 Cast Iron Bulbed Disc

    94 Not used

    95 Not Used

    96 Brass Hub for Disc

    97 Bolt with Brass Dome Nut

    98 Not Used

    99 Not Used

    100 Shaft Bearing

     

    John Gordon Flexible Pulping Chop Assembly

    1 Set of 22 Plastic Fingers

    2 Setting Tube LH 6 Pressure Plate

    3 Setting Tube RH

    4 Screw and Washer for Setting Tube

    5 Rubber Pressure Block

    6 Pressure Plate

    7 Pressure Adjustment Screw

    8 Locknut for Adjustment Screw

    copyright Internet Pipelines UK, 2003